absolute beginner
I briefly mentioned a recent book purchase, Plate to Pixel, in a post earlier this month. I'm not done reading and absorbing, but I've been skimming through and one of the things I've really loved about Helene's styling is the rustic table top backgrounds she uses. I didn't see any explicit directions in the book or on her blog (although there is a brief scene of her painting some wood in this promo video), but I've got piles of old fence boards, so I made up my own version. I finally finished it this weekend, and when the skies went dark and a freak thunderstorm rolled through this afternoon, I decided to set it up on the porch and try it out.
I painted one side a robin's egg blue that I had laying around (someday it will be an accent wall in my laundry room), and sanded the other side, so it's two backgrounds in one! I still need to work on adjusting my camera settings, I think these might be a bit too bright and over-exposed, despite the grey skies. I even started playing around with this reflector set I recently bought, it was quite a bargain! I used the diffuser disc on the photo above and directly below, but there's still some glare. I think I better go read some more, and learn how to adjust my camera better.
Obviously, my styling and composing skills are rather lacking still, but I am going to keep practicing. In the meantime, I've got some raspberries and cream to eat. Oh, I thought you might like to see the whole background thingie:
Here are the very technical instructions (wherein I probably don't use any of the proper woodworking terminology): I took three 6' fence boards, and sawed each in half. Then I cut a couple pieces of 1×2 boards that I also had laying around to the width of the three boards together. I sanded everything and laid three boards down, wrong side up. I put wood glue along one side of one of the 1×2 boards, and positioned it across the three boards. I tried to just nail the 1×2 to the fence boards, but the nails just wouldn't go in, so I used my smallest drill bit (1/16") to drill through them (two holes for each fence board) and then pounded the nails in. After doing this four times, my drill bit broke, so I went up to the next one, and hoped it wasn't too big. Luckily, it wasn't so I continued to add the second 1×2 to the other end. Then I placed the remaining three fence boards on top of the 1×2's, and did the same thing again, except instead of the nails going from the 1×2's into the fence boards, I went through the fence boards into the 1×2's. the nails I used had flat heads, and this is the side that I painted, so they show a little through the paint. I was going for rustic, so this doesn't bother me, but I probably could have used finishing nails and counter-sunk them and used a little wood filler to hide them. Then I painted and sanded the one side. I've left the other side naked so far, but I may stain or wax it eventually. This is so much nicer than my ugly green counter tops for taking pictures of food (and maybe other things too!).
